 |
|
 |
 |
Designed especially for large and medium sized hotels, inns, sauna bath centers, staff bath centers, and heating swimming pools , the water tank of this kind of heat pump can be enlarged freely and? units can be disposed freely to maximize water supply .
We use the world top brand “Copeland” compressor, therefore, its function is more stable, which guarantees the secure and steady operation under various operating conditions; besides, we use the”Motorola“intelligent chip to carry out the entire automatic intelligent control, which guarantees the security of operation. The concern starts from “core”!
|
|
 |
 |
 |
| Compared with normal air source heat pump, in terms of technology, this kind of heat pump has a smaller current capacity but a greater temperature difference. Outlet water can reach very high temperature even when the temperature of inlet water is quite low. The unit is able to use the natural pressure of the cold water. When the water temperature reaches as required, the water may enter the regeneration water tank directly, without hydronic heating between the water tank and the unit. It does not need the circulating water pump, but reduces the circulation pipeline thus saves the initial investment. |
|
 |
 |
 |
Having absorbed the overseas advanced technology, we developed our own air conditioning hot water heat pump. Refrigeration system is added based on the normal air source heat pump water heater units. It can make full use of coldness and heat through the auto-adapted adjustment.
If refrigeration and heating are needed at the same time, it can achieve both simultaneously, using its own internal energy circulation.
|
|
 |
| When it is refrigerating, central air conditioning has to discharge massive quantity of heat through cooling tower or air-cooling condenser. After the transformation we have done about the central air conditioning, we recycle the afterheat discharged by the units to get 30~65℃ household hot water. On one hand, we have reduced the air conditioning waste heat emissions, and raised the refrigeration efficiency of the air conditioning units; On the other hand, we have obtained free hot water to supply the entire building. |
|
 |
 |
 |
| This type of unit is compact, easy for installation, and it does not take lots of space. Lower running noise enables you to enjoy the high quality of life as well as comfortable and peaceful space. Air source small industrial heat pump can be used for villas, small beauty saloons and fitness centers which don’t consume much water. The water tank is adjustable so that we can change hot water supply quantity according to different needs. Meanwhile, it helps cope with the problems of household heat pump deficiency so it is economical and convenient. |
|
 |
 |
 |
Air source heat pump can be used to maintain constant temperature of swimming pools. By connecting heat pumps to swimming pools directly, the heat pump units carry out hydronic heating. When choosing a heat pump, we must bear in mind that swimming pool water is lower required in characteristics compared with household hot water. Thus, reasonable system match can generate bigger quantity of heat and higher COP under the same level of power input. |
|
 |
 |
|
| The waste water source heat pump is to use special heat pump and economic heat interchanger to extract energy from the enterprise waste water heat source which will recycle waste heat energy. The unit supplies about 60℃ hot water for the enterprise, so the enterprise may save the expense of hot water, with very little power consumption.
|
|
  |
|
It is designed especially for barbers’ shops, beauty saloons and leisure centers. Pressure-bearing water tank, quick-heating, little noise, intelligent automatic control designs guarantee the steady operation of all units and maximize hot water supply. It has the following advantages: automatic frost proof, frost-melting, fixed time starting, and constant temperature functions. The constant temperature water supply, without the now-hot or now-cold phenomenon, provides comfortable hot water for customers! |
|
|
 |
 |
 |
 |
|
Add.:No.20 Nantong Opto-Mechatronics Park, Nantong E&T development Zone, Nantong, Jiangsu, China- P.C226009 |
Tel:(86) 513 85981111 Fax:(86) 513 85980699 E-mail:Tenesun@163.com |
Copyright reserved : Jiangsu Tenesun Electric Co.,Ltd. Jiangsu ICP No. 05022829
|
|
|